Yamaha PASC4 Owner'S Manual Download Page 83 | Manualshive

Page: 83 / 129

Yamaha PASC4 Owner'S Manual Download Page 83

H. Battery Pack and charging procedure

Charging plug

Power plug

Battery
capacity
indicator

Charging connector

Battery charger lamp

Charger
display

Battery capacity

indicator lamp

Battery capacity

indicator button

The Battery Pack equipped for the Yamaha e-Bike Sys-
tems is a lithium-ion battery. The lithium-ion battery is
lightweight and offers superior capacity. However, it does
have the following characteristics.

Its performance decreases in extremely hot or cold en-
vironments.

It naturally loses its charge.

The  Battery  Pack  for  the  Yamaha  e-Bike  Systems  also
has an embedded computer which notifies you of estimat-
ed  residual  battery  capacity  and  suspected  faults  via  the
battery capacity indicator lamp.
By pressing the battery capacity indicator button, you can
display  the  residual  battery  capacity  for  approximately  5
seconds.

-
-

Do not use any other charger or charging method to
recharge the Battery Packs. Using any other charger
could result in fire, explosion, or damage the Battery
Packs.

Battery
capacity
indicator

Charging connector

Battery capacity
indicator lamp

Battery capacity
indicator button

IMPORTANT SAFETY

THESE INSTRUCTIONS
TO REDUCE THE RISK OF

FIRE OR ELECTRIC SHOCK,

CAREFULLY FOLLOW

THESE INSTRUCTIONS

1. This manual contains important safety and operat-

ing instructions for Battery Charger type PASC4,
PASC8, and PASC11.
Those types can be found in the labels on the prod-
ucts.

2. Before using Battery Charger, read all instructions

and cautionary markings on Battery Charger, Bat-
tery Pack and product using Battery Pack.

3. CAUTION - To reduce the risk of fire or electric

shock, only use the Battery Charger type PASC4 to
charge  PACB2,  PASB4,  and  PASB5  type  Battery
Packs  for  Yamaha  e-Bike  Systems,  while  only  us-
ing the Battery Charger type PASC8 and PASC11 to
charge PASB6 type Battery Pack for Yamaha e-Bike
Systems.
Other  types  of  batteries  may  burst  causing  injury
to persons and damage.

79

WARNING

Charging
connector

Battery charger lamp

Charging
plug

Battery
capacity
indicator
lamp

Charger
display

Power plug

Battery capacity

indicator button

Battery
capacity
indicator

WARNING

«
...
81
82
83
84
85
...
»

Summary of Contents for PASC4


































































































































Reviews:

No comments