Settings for Song Recording and Playback [SONG SETTING]
64
P-250
Edit Operation
■
Playing back a song repeatedly [SongRepeat]
You can repeatedly play back all songs, or a single song
selected from the preset songs or from storage memory.
• When you start playback, the P-250 plays the cur-
rently-selected song, then starts repeat playback of
the specified songs, continuing until you press the
[TOP] button.
• Press the B [–(NO)]/[+(YES)] buttons to select “On” or
“Off,” and press the D [–]/[+] buttons to specify the
songs to be repeated.
Range to be repeated:
• MemorySongs ... All songs in the storage memory
• PresetSongs....... All preset songs
• All..................... All songs in the storage memory
and all preset songs
• OneSong........... Song selected on the panel
■
Setting the click time signature
[TimeSignature]
Press the C [–]/[+] buttons to set the numerator of the
time signature, and press the D [–]/[+] buttons to set the
denominator of the time signature.
For example, to specify “3/4,” press the C [
–
]/[+] buttons
to select “3” and the D [
–
]/[+] buttons to select “4.”
■
Setting the click volume [ClickVolume]
Press the D [–]/[+] buttons to set the volume (0—127).
■
Turning the click on/off [ClickOnOff]
Use the D [–]/[+] buttons to select one of the following:
• Off..................... No click sounds.
• BellOn............... Chime sounds on the first beat in a
measure. Click sounds on the rest
of the beats.
• BellOff............... Click sounds on every beat.
• Refer to page 61 for general information on setting the parameters.
• Refer to pages 3—5 of the separate “Data List” for information on the default parame-
ter settings.
TERMINOLOGY
TimeSignature = The standard method of denoting the
meter of a piece of music.
TIP
Click does not sound in any mode other than recording,
regardless of the “ClickOnOff” setting.
Summary of Contents for P-250
Page 56: ...MEMO 56 P 250 Edit Operation ...
Page 80: ...MEMO 80 P 250 Appendix ...
