3 of 5
P
ROJECTOR
P
ROGRAMMING
Set the communication settings on the projector using the IR remote included with the projector, and the
projector’s on screen setup menus:
1. Press the
Menu
button on the remote to bring up the on-screen menu.
2. Press
right (+)
button once to scroll to Setup, then press
enter
(center of the round directional
button).
3. Press the
down
arrow
button to scroll to operation, then press
enter
.
4. Press the
down
arrow
button to scroll to
Standby Mode
, then press
enter
.
5. Press the
down
arrow
button to select
RS-232 on
, then press
enter
.
6. Press the
Escape
button a few times to exit the on-screen menu.
7. Power down and restart the projector to save the changes.
Summary of Contents for OneHome LPX-510
Page 5: ...5 of 5 COMMON MISTAKES ...
