3
• Place the speakers on a sturdy, vibration-free
surface. If you cannot obtain good bass quality
when the speakers are placed directly on the
floor, insert a block etc. between the speakers
and the floor.
• Better stereo images will be obtained when the
speakers are slightly angled in towards the
listeners.
• This speaker is not a magnetic shielding type.
Place the speaker apart from the TV so that there
is no influence on TV picture.
The front cover is fastened to the enclosure at four
points, and can be removed if desired. To remove
the cover, hold on to both sides and slowly pull
straight away from the speaker.
To reattach, line up the four pegs on the inside
surface of the cover with the four corresponding
holes on the speaker and push gently.
REMOVING THE FRONT COVER
Type ............................................. 2-way bass reflex
Speaker Unit ................................ 10 cm (4”) woofer
2.5 cm (1”) tweeter
Nominal Impedance ..................................... 6 ohms
Nominal Input Power ........................................ 20W
Maximum Input Power ..................................... 40W
Dimensions (WxHxD) .............. 150 x 225 x 202 mm
(6” x 8-7/8” x 8”)
Weight ................................. 2.4 kg (5 lbs. 5 oz.) x 2
Accessories ........................ Speaker cable (2 m) x 2
* Specifications subject to change without notice
due to product improvements.
* Care should be taken not to exceed the input
power values noted above.
SPECIFICATIONS
Note
When the cover is removed, take care not to
touch the speaker units with your hands or to
exert excessive force with tools.
PLACING THE SPEAKERS
