background image

3

RX-E400

Red (+)

Red line

Speaker (L)

Speaker (R)

Black line

Red line

How to connect:

1

Loosen the knob.

2

Remove the insulation coating at the extremity of each speaker
cable by twisting the coating off.

3

Insert the bare wire.

4

Tighten the knob and secure the cable.
Test the firmness of the connection by pulling lightly on the
cable at the terminal.

Note
Do not let the bare speaker wires touch each other as
this could damage the speaker or the receiver, or both of
them.

The front cover is fastened to the enclosure at four point and can be
removed if desired. To remove the cover, hold on to both sides and
slowly pull straight away from the speaker.
To reattach, line up the four pegs on the inner surface of the cover
with the four corresponding holes on the speaker and push gently.

REMOVING THE FRONT COVER

Note
When the cover is removed, be sure not to touch the
speaker units with your hands or to exert excessive force
with tools.

Type ............................................. 2-way bass-reflex speaker system

Magnetic shielding type

Driver .................................................... 13 cm (5-1/4") cone woofer

2.5 cm (1") dome tweeter

Impedance .................................................................................. 6 

Frequency Response ............................................... 55 Hz to 28 kHz
Nominal Input Power ............................................................... 60 W
Maximum Input Power ........................................................... 110 W
Sensitivity ................................................................ 87 dB/2.83 V/m
Crossover Frequency ............................................................... 3 kHz
Dimensions (W x H x D) ................................. 186 x 300 x 223 mm

(7-5/16" x 11-13/16" x 8-13/16")

Weight ......................................................... 4.3 kg (9 lbs. 8 oz.) x 2
Accessories ................................................. Speaker cable (4 m) x 2

* Specifications are subject to change without notice due to

product improvements.

* Care should be taken not to exceed the input power values noted

above.

SPECIFICATIONS

Loosen

Tighten

Black (–)

Speaker output terminals of

the receiver

When using a banana plug

1

Remove the cover by pulling it toward you.

2

Tighten the terminal knob.

3

Simply insert the banana plug into the terminal.

3

1

2

Banana plug

Reviews: