Description of the Software Programs
NUAGE MASTER Operation Manual
38
USER ASSIGNABLE Page
Overview
This page is used to execute assigned functions. To open
this page, press the USER ASSIGNABLE [Display access]
button (
). To assign the function, configure it in
“NUAGE MASTER Setup” (
).
To select the desired bank, touch “BANK 1” – “BANK 4” in
the Title area, or the USER ASSIGNABLE [Display access]
button.
Each bank has twenty-four buttons, for a total of ninety-
six.
By touching “Nuendo” in the Tool area, you can open
“NUAGE MASTER Setup” window (
Nuendo screen. Touch again to close.
Controls and Functions
1
U1 – U24
Executes the assigned function.
CONTROL ROOM Page
Overview
This page is for operating the Control Room functions. To
open this page, press the CONTROL ROOM [Display
access] button (
).
The CONTROL ROOM page has the following pages.
• MAIN page (
• SPEAKER CONTROL page (
)
To select the desired page, touch the corresponding tab
in the right side of the Title area, or press the CONTROL
ROOM [Display access] button.
If you have configured multiple DAW software programs
and operate them by selecting the DAW SELECT Section
(
), this section will always operate the Control
Room of DAW A. In other words, the Control Room section
is not affected by the DAW software selection.
Controls and Functions
MAIN Page
This page is for operating the general functions in the
Control Room.
1
CLICK
Turns Metronome on (lit) and off.
2
CLICK Level
Adjusts Metronome level. Adjusts Metronome level.
1
7
9
1
2
3
!
)
@
4
5
8
6
[PARAM]
