background image

17

 En

Initial settings

PR

EPAR

ATIO

N

C

ONNE

CTIO

N/

INIT

IAL S

ETT

INGS

PLA

YBA

CK

S

ETTIN

GS

TRO

UBLE

S

HO
O

T

IN

G

APP

END

IX

This unit creates a sound field by reflecting sound beams on the 
walls of your listening room and by broadening the cohesion of 
all the channels. Just as you would arrange the speaker position of 
other audio systems, you need to set the beam angle to enjoy the 
best possible sound from this unit.
This unit employs the beam optimization and sound optimization 
features with the aid of the supplied IntelliBeam microphone, allowing 
you to avoid troublesome listening-based setup and achieving highly 
accurate sound adjustments that best match your listening 
environment. We call these two features “

IntelliBeam

” generically.

Beam optimization:

This feature optimizes the beam angle so that the parameter best 
matches your listening environment.

Sound optimization:

This feature optimizes the beam delay, volume, and quality so 
that the parameters best match your listening environment.
This unit performs these two automatic optimizations with the aid 
of the supplied IntelliBeam microphone. 

2)

Auto setup for appropriate 
surround effects (IntelliBeam)

Installing the IntelliBeam microphone

1

Place the IntelliBeam microphone on a flat 
level surface at your normal listening position.

Use the supplied cardboard microphone stand or a tripod 
to place the IntelliBeam microphone at the same height as 
your ears would be when you are seated.

Assembling the supplied cardboard 
microphone stand

The AUTO SETUP procedure may not be run successfully if this 
unit is installed in one of the rooms described in “Installing this 
unit” 
on page 11. In such cases, run MANUAL SETUP (

p. 20) 

to manually adjust the corresponding parameters.

Do not connect the IntelliBeam microphone to an extension cable 
as doing so may result in an inaccurate sound optimization.

After you have completed the AUTO SETUP procedure, be sure 
to disconnect the IntelliBeam microphone.

The IntelliBeam microphone is sensitive to heat.

– Keep the IntelliBeam microphone away from direct sunlight.
– Do not place the IntelliBeam microphone on top of this unit.

Notes

1

2

3

5

4

Remove

Fit in

Run 
through

Place 
horizontally

Fit in

Make sure that there are no obstacles between the 
IntelliBeam microphone and the walls in your listening 
room as these objects obstruct the path of sound beams. 
However, any objects that are in contact with the walls 
will be regarded as a protruding part of the walls.

2

Check if a video pin cable is connected.

IntelliBeam microphone

Upper limit

Within 1 m (3.3 ft)

Center height of this 

unit

Cardboard microphone 

stand

Within 1 m (3.3 ft)

Listening 

position

1.8 m (6.0 ft) 

or more

Lower limit

Center line

IntelliBeam 
microphone

Cardboard microphone stand

• “BEAM+SOUND OPTIMIZE” screen appears automatically when 

the IntelliBeam microphone is connected. “BEAM OPTIMIZE 
ONLY” or “SOUND OPTIMIZE ONLY” can be selected separately 
in setup menu (

p. 20).

• Data set automatically can be saved in the system memory (

p. 22)

You can save the several data depending on listening room and you 
can change the setting conveniently.

2)

y

Summary of Contents for NS-SWP600




























































Reviews: