Yamaha NS-SW310, Owner'S Manual

Page: 13 / 56

En
gli
s
h
11
En
This function automatically switches the unit between standby and power-on mode.
The subwoofer automatically places itself in standby mode if it does not receive an input signal for 7 or 8 minutes. (The
power indicator lights red.)
When the subwoofer detects a bass signal input of below 200 Hz, it automatically places itself in power-on mode. (The
power indicator lights green.)
Notes
• This function is available only when the POWER switch and STANDBY/ON button are set to ON.
• Noise received from other appliances may extend the time period before the subwoofer places itself in standby
mode to more than 8 minutes.
1
Set the subwoofer to standby.
2
Change the AUTO STANDBY setting.
- LOW: Select this position to activate this function.
- HIGH: If this function does not operate with
AUTO STANDBY switch set to LOW, select this position so that the
subwoofer detects input signals with a lower level and switches the power on automatically.
- OFF: Select this position to deactivate this function, for example, when the subwoofer switches the power on
unexpectedly by sensing noises from other appliances.
AUTOMATIC POWER-SWITCHING FUNCTION
Changing the AUTO STANDBY setting