background image

1

 En

Thank you for choosing the Yamaha NS-P285 5.1CH Speaker Package.
Make sure the package contains the following items. 

Before you connect the speakers, place each speaker in 
its respective location. Speaker positioning is very 
important as it affects the overall sound quality of the 
system. Place the speakers in locations that will 
optimize the sound quality at your listening position. 
Refer to the illustration.

The position of the subwoofer is not as critical as the 
position of the other speakers because sub-bass 
sounds are not very directional. Refer to “Installing the 
subwoofer” on page 2
 for more information.

Note 

• Placing the speakers too close to a CRT-type TV 

may impair the picture color or cause a buzzing 
noise. In this case, move the speakers at least 20 cm 
(8") away from the TV. This is not an issue with LCD 
and plasma TVs.

Contents

Package contents................................................1
Installing the speakers.......................................1

Installing the front, center, and surround 

speakers ...........................................................2

Installing the subwoofer.......................................2
Wall-mounting the speakers................................2
Attaching the speaker stands...............................2

Connecting the speakers .................................. 3

Connection diagram.............................................3
Connecting the power cables ..............................4

Using the Subwoofer ......................................... 4

Setting the subwoofer volume .............................4
Frequency characteristics.....................................5

Troubleshooting ................................................. 5
Specifications ...................................................... 6

Package contents

Speaker cable 25 m (82 ft.) x1

(To be cut into 5 lengths for the 
front, center, and surround 
speakers. Take care to prevent 
injury when preparing the cables.)

Subwoofer cable 
5 m (16 ft.) x1

Non-skid pads (4 pcs.) x1

(For the center speaker)

Subwoofer (NS-SW280 x1)

The Subwoofer features a built-in power amplifier and utilizes 
Advanced Yamaha Active Servo Technology to provide high-quality 
sub-bass sound that adds real “punch” to your home theater.

Front and surround speakers (NS-B285 x4), 
center speaker (NS-C385 x1)

The front and surround speakers are full-range acoustic-suspension 
speakers. The center speaker is a 2-way acoustic suspension speaker.

Non-skid pads: 

When placing 

the center speaker on a flat 
surface, affix the included 
non-skid pads to the corners 
of the speaker undersides, as 
shown. The pads will prevent 
the speaker from moving 
around.

 Center speaker

Non-skid pad

Speaker stand x4

(See page 2)

Screw x4

(For Speaker stand)

Installing the speakers

Center

Front 
right

Subwoofer

Surround 
left

Front

left

Surround
right

Summary of Contents for NS-SW280

















Reviews: