4
Wall mounting the surround speakers
When mounting the speakers on a wall, attach one of the spacing pads provided near each of the corners on
the rear surface of the speaker to prevent the speaker cable from being caught between the wall and the
speaker.
Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting
bracket on the protruding screws.
Make sure that the screws are securely caught by the narrow sections of the “key hole” opening.
WARNING
Each speaker weighs 2.6 lbs (1.2 kg). Do not mount the speakers on thin plywood or a wall with soft surface
material, since the screws may pull away from the surface and fall. This will damage the speakers and can
cause personal injury.
Do not mount the speakers on a wall with nails, adhesives, or any other unstable hardware. Long-term use
and vibrations may cause them to fall.
To avoid accidents resulting from tripping over loose speaker cords, they should be affixed to the wall or floor
molding.
Secure installation is the purchaser's responsibility.
SETTING UP THE SPEAKERS
Wall / wall support
Min
7/8”
7/32”
Tapping screw
(Available at the hardware store)
When using speaker brackets to mount the
speakers on a wall or ceiling, it is strongly
recommended that safety wire, which may be
included with the bracket, be used between the
speaker and the bracket to prevent the speaker
from falling.
5-7/8”
(150mm)
1
2
A screw with a diameter of
1/4” can be used.
(Hole depth: 9/32”)
You can also use the screw hole on the back of the
speaker for installing the speakers on
commercially available speaker brackets.
