22
Connecting to a network using another method
You can connect the unit to a wireless network without using
MusicCast CONTROLLER.
Select a connection method that is suitable for your environment.
• Sharing the iOS device setting (page 22)
• Using the WPS push button on the router (page 24)
• Manual setup (page 25)
You can easily setup a wireless connection by applying the
connection settings of your iOS device (iPhone) to this unit.
Before proceeding, confirm that your iOS device is connected to a
wireless LAN router (access point).
NOTE
• Performing the following procedure will initialize all network settings.
• This configuration does not work if the encryption method of your wireless
router (access point) is WEP. In this case, use another connection method.
1
Press SETUP.
2
Use the cursor keys (
/
) to select “Network”, and
then press ENTER.
NOTE
• To return to the previous screen, press RETURN.
3
Use the cursor keys (
/
) to select “Connection”,
and then press ENTER.
4
Use the cursor keys (
/
) to select “Wireless”, and
then press ENTER.
5
Use the cursor keys (
/
) to select “Share
Setting”, and then press ENTER.
6
Press ENTER.
The connection process starts. “Connecting” appears on the
display.
NOTE
• If the unit is connected to the network by a cable, “LAN CBL Pls
disconnect” will appear on the display. Disconnect the network cable
from the unit, and then press ENTER.
7
In the Wi-Fi screen of your iOS device, select this
unit as the AirPlay speaker.
Sharing the iOS device setting
¡WPS
WIRELESS
Wireless(WAC)
SHARE
This unit’s name
E.g., (iOS 10)
AMP
MUTE
INPUT
DISPLAY
SETUP
OPTION
RETURN
REPEAT
SHUFFLE
NOW PLAYING
ENTER
HOME
MEMORY
NET
USB
BLUETOOTH
DIMMER
MUTE
PRESET
VOLUME
7
10
8
9
4
5
6
1
2
3
AMP
MUTE
INPUT
DISPLAY
OPTION
REPEAT
SHUFFLE
NOW PLAYING
HOME
MEMORY
NET
USB
BLUETOOTH
DIMMER
MUTE
PRESET
VOLUME
7
10
8
9
4
5
6
1
2
3
RETURN
SETUP
ENTER
Cursor keys
