Selecting & Playing Voices
NP-30/YNP-25
Owner’s Manual
20
Adding Variations to the Sound – Reverb
This control enables you to select four different types of reverb effect that add extra depth and
expression to the sound to create a realistic acoustic ambience.
Selecting a Reverb Type
While holding down the
[GRAND PIANO]
button, press one of the C2–E2 keys
to select a reverb type.
Adjusting Reverb Depth
While holding down the
[GRAND PIANO]
button, press one of the C3–A
#
3
keys to adjust the reverb depth for the selected voice.
While holding down the
[GRAND PIANO]
button, press the B3 key to set the
reverb to the depth most suitable for the selected voice.
Key
Reverb Type
Description
C2
Room
This setting adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
C
#
2
Hall1
For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates
the natural reverberation of a small-size concert hall.
D2
Hall2
For a truly spacious reverb sound, use the HALL 2 setting. This effect sim-
ulates the natural reverberation of a large concert hall.
D
#
2
Stage
Simulates the reverb of a stage environment.
E2
Off
No effect is applied.
C1
C2 E2
Reverb depth range:
0 (no effect)–
10 (maximum depth)
NOTE
B3
C1
C2
The depth value increases as you press higher keys.
A
#
3: depth 10
C3: depth 0
The default reverb type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
