Yamaha NMX GPD125-A, Owner'S Manual

Page: 54 / 90

Perio d ic maintenance an d a d justment
6-14
6
4. Remove the coolant reservoir cov-
er.
5. Remove the coolant reservoir cap,
add coolant to the maximum level
mark, and then install the reservoir
cap.
WARNING! Remove only
the coolant reservoir cap. Never
attempt to remove the ra
d iator
cap when the en g ine is hot.
[EWA15162]
NOTICE:
If coolant is not
availa b le, use d istille d water or
soft tap water instea d . Do not
use har d water or salt water
since it is harmful to the en g ine.
If water has b een use d instea d
of coolant, replace it with cool-
ant as soon as possi
b le, other-
wise the coolin g system will not
b e protecte d a g ainst frost an d
corrosion. If water has b een
a dd e d to the coolant, have a
Yamaha d ealer check the anti-
freeze content of the coolant as
soon as possi
b le, otherwise the
effectiveness of the coolant will
b e re d uce d .
[ECA10473]
6. Install the coolant reservoir cover.
7. Place the right floorboard mat in
the original position and push it
downward to secure it.
EAU67280
To chan g e the coolant
1. Place the vehicle on a level sur-
face and let the engine cool if nec-
essary.
2. Remove panels A and B. (See
page 6-7.)
3. Remove the radiator cover by re-
moving the bolts.
4. Place a container under the en-
gine to collect the used coolant.
5. Remove the radiator cap.
WARNING! Never attempt to re-
move the ra
d iator cap when the
en g ine is hot.
[EWA10382]
1. Coolant reservoir cover
1
1. Coolant reservoir cap
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
1
1. Radiator cover
2. Bolt
1
2
U2DSE0E0.book Page 14 Thursday, March 19, 2015 10:34 AM