Instrument an
d
control functions
4-15
4
The temperature of the engine coolant
from 104 °F to 255 °F is shown in 1 °F
increments.
If the message “Hi” flashes, stop the
vehicle, then stop the engine and let it
cool. (See page 7-37.)
TIP
When the coolant temperature is
below 104 °F, “Lo” will be dis-
played.
The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
The temperature of the air drawn into
the intake system from 16 °F to 122 °F
is shown in 1 °F increments.
TIP
16 °F will be displayed even if the
air temperature falls below 16 °F.
The temperature displayed may
vary from the actual ambient tem-
perature.
Bri
g
htness an
d
shift li
g
ht control
mo
d
e
This mode cycles through five control
functions in the order listed below.
Display brightness
Shift light on / flash / off
Shift light on r/min
Shift light off r/min
Shift light brightness
TIP
The brightness level display shows the
selected brightness level.
To adjust the display brightness
1. Turn the key to “OFF”.
2. Push and hold the “MENU”
switch.
3. Turn the key to “ON”, and then re-
lease the “MENU” switch after five
seconds.
4. Push the “SELECT” switch up or
down to select the desired bright-
ness level.
5. Push the “MENU” switch to con-
firm the selected brightness level.
The control mode changes to the
shift light on / flash / off setting
function.
To set the shift light on / flash / off
1. Push the “SELECT” switch up or
down to select one of the follow-
ing style settings:
1. Air temperature display
1
1. Brightness level display
1
UB5B13E0.book Page 15 Wednesday, November 10, 2021 11:42 AM
