Instrument an
d
control functions
4-29
4
EAU84610
A
d
justin
g
the shock a
b
sor
b
er
assem
b
ly
This shock absorber assembly is
equipped with a spring preload adjust-
ing knob and a rebound damping force
adjusting screw.
NOTICE
ECA10102
To avoi
d
d
ama
g
in
g
the mechanism,
d
o not attempt to turn
b
eyon
d
the
maximum or minimum settin
g
s.
Sprin
g
preloa
d
To increase the spring preload and
thereby harden the suspension, turn
the adjusting knob in direction (a). To
decrease the spring preload and there-
by soften the suspension, turn the ad-
justing knob in direction (b).
TIP
When adjusting the spring preload set-
ting, turn the adjuster in direction (b)
until it stops, and then count the clicks
in direction (a).
Re
b
oun
d
d
ampin
g
force
To increase the rebound damping for-
ce and thereby harden the rebound
damping, turn the adjusting screw in
Compression
d
ampin
g
settin
g
:
Minimum (soft):
13 click(s) in direction (b)
Standard:
8 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
1. Spring preload adjusting knob
Sprin
g
preloa
d
settin
g
:
Minimum (soft):
0 click(s) in direction (a)
Standard:
1 click(s) in direction (a)
Maximum (hard):
24 click(s) in direction (a)
(a)
(b)
1
UBD510E0.book Page 29 Tuesday, July 17, 2018 1:55 PM
