Instrument and control functions
6-6
1
2
3
4
5
6
7
8
9
10
11
12
13
TIP
The odometer will lock at 99999 and
cannot be reset.
Tripmeter
The tripmeter shows the distance trav-
eled since it was last reset.
TIP
The tripmeter will reset and continue
counting after 9999.9 is reached.
To reset the tripmeter
1. Use the select button to display the
clock.
2. Press and hold the select button
until the tripmeter is reset.
Charging status display
When charging with the vehicle power
on, the charging status display will
come on automatically. It indicates the
current charge of the lithium-ion batter-
ies as “Lo”, “Full” or a percentage in be-
tween.
Vehicle status messages
The following status messages appear
on the information display in certain sit-
uations:
“PUSH”
The vehicle and EV system are
ready to start.
“HOT”
The lithium-ion battery, MCU or EV
motor temperature is high. (Tem-
perature warning function to pro-
tect EV system. (See page 4-4.))
“COLD”
The lithium-ion battery tempera-
ture is low.
“OLD”
The lithium-ion battery capacity
has degraded and it needs to be
replaced.
EAU96541
Drive mode display
Displays the current drive mode.
When the vehicle is in the ECO mode,
the “ECO” icon will be displayed.
For more details on the drive modes,
see page 4-4.
To switch the drive modes, see page
6-8.
EAU96550
Incoming notification icon “ ”
This icon flashes for 10 seconds when
the connected smartphone receives an
SMS, E-mail or other notification. After
that, the icon stays on until you turn the
vehicle off.
TIP
This function works only when the
smartphone is connected to the
vehicle.
Notification setting is needed for
each application at the connected
smartphone in advance.
EAU96560
Incoming call notification icon “ ”
This icon flashes when there is an in-
coming call to the connected smart-
phone. If you do not answer the call, the
icon stays on until you turn the vehicle
off.
TIP
This function works only when the
smartphone is connected to the vehi-
cle.
BFM-F8199-E0.book 6 ページ ２０２２年２月４日 金曜日 午後４時１１分
