Updade procedure
1.
Connect a computer directly to a n8/n12 (without using a hub) by using a FireWire
cable.
Be sure to disconnect all other FireWire devices, except the one to be updated.
2.
Simultaneously hold down the [PREV] button and [CLICK REMOTE ON] buttons and
turn the power on for the n8/n12.
The n8/n12 will boot up in update mode. When booting up in update mode, the LED at
the top of the MASTER LEVEL METER-L lights up. After a few seconds, the LED at the
bottom of the MASTER LEVEL METER-R will flash.
3
