E-9
SPECIFICATIONS
Maximum output...................... 500 W + 500 W (4 to 8
Ω
)
Dynamic power..................... 1000 W + 1000 W (4 to 8
Ω
)
Damping factor................................................ or more 200
Total harmonic distortion............... or less 0.003% (1 kHz)
Dynamic range........................................... or more 120 dB
(IHF-A, LPF: 20 kHz)
Frequency response.................... 1 Hz to 100 kHz (+ 3 dB)
20 Hz to 20 kHz (+0.5 dB)
Channel separation..................................... or more 100 dB
(5.1 k
Ω
terminated, 1 kHz)
Input jacks
UNBALANCE........................ Unbalanced 1.3 V/25 k
Ω
BALANCE .................................... Balanced XLR 1.3 V
Pin 2 hot
Output jacks
SPEAKER................. Supports standard speaker cables,
banana plugs, and Y plugs
Modulation ..................... PWM (Pulse Width Modulation)
Output ............................. SEPP (Single-Ended Push-Pull)
Power source......... Resonant-type switching power supply
(frequency: 88 kHz)
CONTROL OUT
Power on .......................................... +12 V (Max. 15 mA)
Power off ...................................................................... 0 V
Power supply
U.S.A and Canada models ...................... AC 120 V, 60 Hz
Australia model....................................... AC 240 V, 50 Hz
U.K. and Europe models......................... AC 230 V, 50 Hz
China and Korea models......................... AC 220 V, 60 Hz
Asia model.................... AC 110/120/220/240 V, 50/60 Hz
Power consumption ................................................. 350 W
Power consumption in st.andby mode............ or less 0.1
Ω
Dimensions (W x H x D)..................... 435 x 75 x 437 mm
(17-1/8” x 2-7/8” x 17-3/16”)
Weight ............................................ 10.4 kg (22 lbs. 15 oz)
Accessory
AC power cable
Specifications are subject to change without notice.
MX-D1_U.fm Page 9 Thursday, June 26, 2003 5:14 PM
