Part names and functions
En
13
7
INPUT (XLR) jack
For connecting to a pre-amplifier with XLR output jacks (p.14).
To use the XLR jack, set the corresponding BAL/UNBAL switch to
“BAL”.
When connecting an XLR balanced cable, match the pins and insert
the “male” connector of the cable until you hear a click.
• When disconnecting the cable from the unit, hold down the PUSH
button on the unit and then pull the connector out.
8
INPUT (RCA) jack
For connecting to a pre-amplifier with RCA output jacks (p.14).
To use the RCA jack, set the corresponding BAL/UNBAL switch to
“UNBAL”.
• Remove the RCA short pins attached to the INPUT (RCA) jacks before
making connections. Be sure to keep them in a place inaccessible to
small children who may accidentally swallow small parts.
• To protect against noise contamination, we recommend attaching
the RCA short pins when the INPUT (RCA) jacks are not in use.
9
BAL/UNBAL switch
Switches between XLR input and RCA input for each channel (p.14).
About the XLR jacks
• The pin assignments for the XLR jacks of the unit are shown below.
Before connecting an XLR balanced cable, refer to the instruction
manual of your pre-amplifier and verify that its XLR output jacks are
compatible with the pin assignments.
BA
L.
UNB
AL.
XLR balanced cable (male)
3. COLD
2. HOT
1. GND
BAL.
UNBA
L.
RCA cable
RCA short pin
Summary of Contents for MX-A5200BL
Page 2: ......
