Yamaha MWS150-A Owner'S Manual Download Page 79

Page: 79 / 98

Perio

ic maintenance an

justment

7-32

4. Remove the blown fuse, and then

install a new fuse of the specified
amperage.

WARNING! Do not

use a fuse of a hi

her ampera

ratin

than recommen

avoi

causin

extensive

am-

e to the electrical system an

possi

ly a fire.

[EWA15132]

5. Turn the key to “ON” and turn on

the electrical circuit in question to
check if the device operates.

6. If the fuse immediately blows

again, have a Yamaha dealer
check the electrical system.

7. Install the fuse box cover, and

then close the seat.

EAU62850

Hea

This model is equipped with an LED-
type headlight.
If a headlight does not come on, have
a Yamaha dealer check its electrical
circuit.

NOTICE

ECA16581

Do not affix any type of tinte

film or

stickers to the hea

ht lens.

1. Fuse box cover

Specifie

fuses:

Main fuse:

15.0 A

Main fuse 2:

7.5 A

Terminal fuse 1:

2.0 A

Signaling system fuse:

7.5 A

ABS motor fuse:

30.0 A (MWS150-A)

ABS solenoid fuse:

30.0 A (MWS150-A)

ABS control unit fuse:

7.5 A (MWS150-A)

UBE2EYE0.book Page 32 Monday, July 17, 2017 2:03 PM

Summary of Contents for MWS150-A



































































































Search results

Summary of Contents for MWS150-A

Reviews:

Related manuals for MWS150-A

Brands by name

Popular brands

Yamaha MWS150-A, Owner'S Manual

Search results

Summary of Contents for MWS150-A

Reviews:

Related manuals for MWS150-A

Brands by name

Popular brands