MW12CX/MW12C
46
REC switch
ON when taking measurement only / OFF otherwise
ST switch
ON when taking measurement only / OFF otherwise
Channel fader
Maximum
• ST INPUT (9/10, 11/12)
EQ (HIGH, LOW) GAIN control
CENTER
AUX1, AUX2 level control (MW12C)
Maximum
AUX, EFFECT level control (MW12CX)
Maximum
AUX1 PRE switch (MW12C)
OFF (POST)
AUX PRE switch (MW12CX)
OFF (POST)
BAL control
L (turned counterclockwise fully)
ON switch
ON (indicator should light) when taking measurement only /
OFF otherwise
PFL switch
ON when taking measurement only / OFF otherwise
REC switch
ON when taking measurement only / OFF otherwise
ST switch
ON when taking measurement only / OFF otherwise
Channel fader
Maximum
• DIGITAL EFFECT (MW12CX)
PROGRAM dial
1
PARAMETER control
Minimum
AUX level control
Maximum when taking measurement only / MIN. otherwise
ON switch
ON (indicator should light) when taking measurement only /
OFF otherwise
PFL switch
ON when taking measurement only / OFF otherwise
EFFECT RTN fader
Maximum when taking measurement only / MIN. otherwise
• MASTER control
REC OUT/GROUP1-2 Master fader (STEREO)
Maximum
REC OUT/GROUP1-2 TO ST ASSIGN switch
OFF
STEREO Master fader (STEREO)
Maximum
AUX1, AUX2 SEND Master level control (MW12C)
Maximum
AUX, EFFECT SEND Master level control (MW12CX)
Maximum
RETURN TO AUX1, ST level control (MW12C)
Maximum
RETURN TO AUX, ST level control (MW12CX)
Maximum
MONITOR level control
Maximum
PHONES level control
Maximum
STEREO/REC switch
STEREO (OFF)
2TR IN/USB level control
Minimum
TO STEREO/TO MONITOR switch
OFF (TO STEREO)
• OTHERS
PHANTOM switch
OFF
2-3
The input signal should be 1 kHz sine wave unless otherwise specified.
2-4
The input signal impedance should be 150
Ω
.
2-5
Power indicator
When turning on the power, check the power indicator lights up.
2-6
Gain
With controls set as specified in the section 2-2, check the output levels are in the range specified in the table 2-6-1 to 2-6-6.
Summary of Contents for MW12C
