When necessary
|
Troubleshooting
38
En
Troubleshooting
If the unit stops operating correctly, check the following points.
If taking the appropriate action does not solve the problem, or if there is a problem not listed below, press the STANDBY/ON (power) button located on the unit’s back
panel to turn off the power, disconnect the power cord, and contact your nearest authorized Yamaha dealer or service center.
General
Problem
Cause
Action
Reference
page
Pressing STANDBY/ON (power)
does not turn on the power.
The AC adaptor has come unplugged from this unit’s DC IN
jack or from the AC outlet, or is not firmly plugged in.
Firmly plug the AC adaptor into this unit’s DC IN jack and into
an AC outlet.
When you press STANDBY/ON
(power), the STANDBY/ON
(power) indicator flashes and
the power does not turn on.
The protection circuit operated three times in succession.
In order to protect the unit, the power will no longer turn on.
Contact a Yamaha service center to have the unit repaired.
—
Pressing SOURCE does not
switch the source.
The audio output select switch is set to PHONO OUT.
Set the audio output select switch to LINE OUT.
The platter does not rotate.
The belt is not correctly positioned on the platter and pulley,
or the belt has come off.
Attach the belt correctly to the platter and the pulley.
STANDBY/ON (power) is not on.
Turn STANDBY/ON (power) on.
No sound.
The head shell is not correctly attached to the tone arm.
Attach the head shell correctly to the tone arm.
The RCA stereo cable is not connected correctly.
Connect the RCA stereo cable correctly.
The mute setting of the amplifier is on.
Turn off the mute setting of the amplifier.
—
The audio output select switch of this unit is set incorrectly.
Set the audio output select switch correctly for the device
that is connected.
