Yamaha MusicCast R-N2000ASL User Manual Download Page 70

Page: 70 / 150

Playing this product’s audio through Bluetooth speakers/
headphones (audio transmission)

You can output the audio playing on this product to Bluetooth speakers/headphones.

Only connect to Bluetooth speakers/headphones that have volume adjustment. This product cannot adjust
their volume.

Bluetooth speakers/

headphones

This product

Select an input other than “Bluetooth”.

Put the Bluetooth speakers/headphones you want to connect in Pairing mode.

Select the input source with the MusicCast Controller app.

Tap the Settings icon on the playback screen.

Tap “Bluetooth Transmission” on the Sound Settings screen.

Turn the “Bluetooth transmission” on from the Bluetooth Transmission screen.

Select the Bluetooth speakers/headphones to send to.

Once the connection is complete, audio is output from the Bluetooth speakers/headphones.

NOTE

(

Adjust the volume on the connected Bluetooth device.

(

The audio being played is also output from the speakers connected to this product.

(

AirPlay, DSD, and PCM audio exceeding 192 kHz cannot be transmitted.

(

When using Pure Direct, audio of input sources other than network content cannot be transmitted.

(

Audio cannot be sent and received at the same time via the Bluetooth function.

(

To disconnect the Bluetooth device, do any of the following.

(

Perform a disconnect operation on the Bluetooth device.

(

Switch the input of this product to “Bluetooth”.

(

Switch “Bluetooth” on the Setup menu to “Off”.

(

The Bluetooth indicator on the front panel lights up when a Bluetooth device is connected.

Summary of Contents for MusicCast R-N2000ASL























































































































































Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands

Yamaha MusicCast R-N2000ASL, User Manual

Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands