Yamaha MTN690-U, Owner'S Manual

Page: 23 / 96

Instrument an d control functions
3-8
3
EAU87391
Transmission g ear d isplay
This display shows the selected gear.
The neutral position is indicated by “–”
and by the neutral indicator light.
EAU92211
Multi-function d isplay
The multi-function display is equipped
with the following:

an odometer (ODO)

two tripmeters (TRIP 1 and TRIP 2)

a fuel reserve tripmeter (TRIP F)

an instantaneous fuel consump-
tion display (km/L, L/100 km, or
MPG)

an average fuel consumption dis-
play (AVE_ _._ km/L, AVE_ _._
L/100 km, or AVE_ _ _._ MPG)

a coolant temperature display (_ _
°C)

an air temperature display (Air_ _
°C)
Push the “TRIP” switch to change the
display in the following order:
ODO
→
TRIP 1
→
TRIP 2
→
TRIP F
→
km/L or L/100 km or MPG
→
AVE_ _._
km/L or AVE_ _._ L/100 km or AVE_ _._
MPG
→
_ _ °C
→
Air_ _ °C
→
ODO
TIP

The fuel reserve tripmeter appears
only when you are low on fuel.

Push the “INFO” switch to change
the display in the reverse order.
EAU86890
O d ometer
The odometer shows the total distance
traveled by the vehicle.
TIP
The odometer will lock at 999999 and
cannot be reset.
EAU92221
Tripmeters
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, change the dis-
play to the tripmeter you want to reset,
and while the digits are flashing, push
the “INFO” switch until it is reset.
TIP
The tripmeters will reset and continue
counting after 9999.9 is reached.
EAU92231
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter “TRIP F” and starts counting the
distance traveled from that point.
1. Transmission gear display
1. Multi-function display
1
1