background image

Periodic maintenance and adjustment

6-25

1

2

3

4

5

6

7

8

9

10

11

12

may contain substances that
could damage the O-rings.

[ECA11112]

EAU23098

Checking and lubricating the 

cables

The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.

WARNING! Damage to the outer
housing of cables may result in in-
ternal rusting and cause interfer-
ence with cable movement. Replace
damaged cables as soon as possi-
ble to prevent unsafe condi-
tions.

[EWA10712]

EAU23115

Checking and lubricating the 

throttle grip and cable

The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated by a
Yamaha dealer at the intervals speci-
fied in the periodic maintenance chart.
The throttle cable is equipped with a
rubber cover. Make sure that the cover
is securely installed. Even though the
cover is installed correctly, it does not
completely protect the cable from water
entry. Therefore, use care not to pour
water directly onto the cover or cable
when washing the vehicle. If the cable
or cover becomes dirty, wipe clean with
a moist cloth.

Recommended lubricant:

Yamaha cable lubricant or other suit-
able cable lubricant

B90-9-E0_1.book  25 ページ  2015年12月15日 火曜日 午後8時5分

Summary of Contents for MTM850











































































































Reviews: