Instrument an
d
control functions
4-12
4
used in case of an emergency or to
warn other drivers when your vehicle is
stopped where it might be a traffic haz-
ard.
The hazard lights can be turned on or
off only when the main switch is in the
“ON” position. You can turn the main
switch to the “OFF” or “LOCK” posi-
tion, and the hazard lights will continue
to flash. To turn off the hazard lights,
turn the main switch to the “ON” posi-
tion and operate the hazard switch
again.
NOTICE
ECA10062
Do not use the hazar
d
li
g
hts for an
exten
d
e
d
len
g
th of time with the en-
g
ine not runnin
g
, otherwise the
b
at-
tery may
d
ischar
g
e.
EAU94362
“TRIP/INFO” switch
This switch is used to make setting and
display changes in the multi-function
meter unit. See page 4-5 for more in-
formation.
To use the “TRIP” switch, move the
“TRIP/INFO” switch in direction (a)
(same function as button B on the mul-
tifunction meter).
To use the “INFO” switch, move the
“TRIP/INFO” switch in direction (b)
(same function as button A on the mul-
tifunction meter).
EAU12823
Clutch lever
To disengage the drivetrain from the
engine, such as when shifting gears,
pull the clutch lever toward to the han-
dlebar. Release the lever to engage the
clutch and transmit power to the rear
wheel.
TIP
The lever should be pulled rapidly and
released slowly for smooth shifting.
(See page 6-3.)
1. “TRIP/INFO” switch
1
(b)
(b)
(b)
(a)
(a)
(a)
1. Clutch lever
1
UBEE20E0.book Page 12 Friday, October 29, 2021 9:28 AM
