Yamaha MT 400 Owner'S Manual Download | Manualshive

Page: 4 / 50

background image

3

—Owner’s Manual

Welcome to the MT400

MT400 Features

The MT400 consists of three major sections: a Mixer section that enables you to mix sounds
(with eight inputs and one stereo output): a Recorder section that records and plays sound
(with four tracks and four channels): and utility sections including meters, power switch, etc.

Mixer

•

Continuously variable GAIN controls on Input Channels 1 through 4 allow the MT400 to
handle any type of input source with ease, including microphone and line-level signals such as
synthesizers.

•

Musical three-band EQ on each input channel, and INSERT I/O jacks on Input Channels 1
and 2 for external processor patching enable high-quality recording.

•

Two auxiliary sends for external reverb and other effects processor patching.

•

Two stereo input jacks for connecting a synthesizer and other line-level instruments that have
stereo outputs. These jacks can be also used to return processed signals from external signal
processors.

•

In-line configuration that allows you to control input signals and tape playback signals
simultaneously. You can monitor track signals adjusted by the CUE controls, while making a
recording on all four input channels. During mixdown, you can play back four-track signals
via the input channels, while mixing input signals via the CUE controls.

Recorder

•

dbx™ noise reduction system provides a signal-to-noise ratio in excess of 80 dB.

•

Punch in/out functions using a footswitch or the switch on the panel.

•

SYNC OUT outputs a sync track (Track 4) signal, providing synchronous operation between
the MT400 and a MIDI sequencer. In SYNC mode, the dbx noise reduction can be turned off
for Track 4, ensuring reliable synchronization.

•

Tape speed is switchable between 9.5 cm/second and 4.8 cm/second. The MT400 standard
tape speed is 9.5 cm/second for greater sonic performance. A speed of 4.8 cm/second is the
same speed as a normal cassette recorder, doubling the recording time relative to the MT400
standard speed. Pitch control enables you to fine-adjust the pitch in the range between –10%
and +10%.

«
...
2
3
4
5
6
...
»

Summary of Contents for MT 400



















































Reviews:

No comments

Related manuals for MT 400

Brand: NAD Pages: 8

Brand: NAIM Pages: 27

Brand: Trigon Pages: 13

Brand: Teac Pages: 116

Brand: Farenheit Pages: 29

MediaServer MS5000

Brand: Imerge Pages: 68

Brand: Samy Pages: 36

Brand: Nextar Pages: 27

Brand: Alcor Pages: 22

Video 2 Go MP4-P13

Brand: Laser Pages: 11

m:robe MR-F20 Series

Brand: Olympus Pages: 87

Brand: Technics Pages: 2

Brand: I-Tech Pages: 21

Brand: Creative Pages: 1

Brand: waves system Pages: 30

Brand: Emerson Pages: 20

NICK JR DORA the EXPLORER DTE329

Brand: Emerson Pages: 25

NickJr Dora the Explorer DTE328

Brand: Emerson Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands