Instrument an
d
control functions
5-27
5
TIP
Use the special wrench and extension
bar in the tool kit to make this adjust-
ment.
Re
b
oun
d
d
ampin
g
force
Turn the adjusting screw in direction (a)
to increase the rebound damping
force.
Turn the adjusting screw in direction (b)
to decrease the rebound damping
force.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the turns in di-
rection (b).
TIP
When turning the damping force ad-
juster in direction (b), it may turn be-
yond the stated specifications,
however such adjustments are ineffec-
tive and may damage the suspension.
WARNING
EWA10222
This shock a
b
sor
b
er assem
b
ly con-
tains hi
g
hly pressurize
d
nitro
g
en
g
as. Rea
d
an
d
un
d
erstan
d
the fol-
lowin
g
information
b
efore han
d
lin
g
the shock a
b
sor
b
er assem
b
ly.
Do not tamper with or attempt
to open the cylin
d
er assem
b
ly.
Do not su
b
ject the shock a
b
-
sor
b
er assem
b
ly to an open
flame or other hi
g
h heat source.
This may cause the unit to ex-
plo
d
e
d
ue to excessive
g
as
pressure.
Do not
d
eform or
d
ama
g
e the
cylin
d
er in any way. Cylin
d
er
d
ama
g
e will result in poor
d
ampin
g
performance.
1. Spring preload adjusting ring
2. Extension bar
3. Special wrench
4. Position indicator
Sprin
g
preloa
d
settin
g
:
Minimum (soft):
1
Standard:
4
Maximum (hard):
7
7 6 5 4
3 2 1
4
1
1
1
2
2
3
3
(a)
(a)
(a)
(b)
(b)
(b)
1. Rebound damping force adjusting screw
Re
b
oun
d
d
ampin
g
settin
g
:
Minimum (soft):
2 1/2 turn(s) in direction (b)
Standard:
1 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
1 (a)
(b)
UB7N12E0.book Page 27 Tuesday, August 23, 2022 10:08 AM
