6
Installation Examples
Speaker stand
Ceiling suspending with eye bolts
BWS251-400 suspended speaker bracket
and BAD251 adapter
BCS251 ceiling speaker bracket and
BAD251 adapter
BBS251 baton speaker bracket and
BAD251 adapter
• Installation must be carried out by an installation specialist.
• Do not install two or more speakers on a single speaker stand or bracket. The speaker(s) may
fall, resulting in injury.
• You need a BAD251 bracket adapter to use a BWS251-400, BCS251, or BBS251 speaker
bracket.
• Due to abrasion or corrosion, parts may deteriorate. To use the product safely, be sure to per-
form regular maintenance and inspections.
• Read the instruction manual for the speaker stand or speaker bracket when you install the
stand or bracket.
Knob
1
3
2
NEUTRIK
1
3
2
NEUTRIK
NEUTRIK
3
1
2
Speaker stand
160 cm or less
• Make sure the stand is
sufficiently durable to
support the weight of
the speaker.
• Set up the speaker
stand so that the height
will be 160 cm or less. If
the height exceeds
160 cm, the stand will
become unstable and
may fall.
• Place it on a level,
non-slippery, sturdy
surface.
• Spread the legs of the
stand to the maximum
extent.
• Be sure to fix the stand
so that it will not fall. (For
example, you could
place a sand bag on the
tripod legs to add weight
for stability.)
M8 eye bolt
*
M8 eye bolts are optional.
Knob (eye bolt M6)
• You can tilt or incline the speaker
using a knob (eye bolt M6).
max. 20 degrees
235923
Baton diameter
ø34 –ø51
235923
