Yamaha MOX8 Reference Manual Download

Page: 61 / 160

MOX6/MOX8 Reference Manual

Performance Mode

Performance Record

Supplementary Information

From this display you can apply five-band equalization (LOW, LOW MID, MID, HIGH MID, HIGH) to all Parts of the

selected Performance, or to all Voices.

SHAPE

Determines whether the equalizer type used is Shelving or Peaking. The Peaking type attenuates/boosts the signal at

the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at frequencies above or below

the specified Frequency setting. This parameter is available only for the LOW and HIGH frequency bands.

Settings:

shelv (Shelving type), peak (Peaking type)

shelv

peak

FREQ (Frequency)

Determines the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting.

Settings:

LOW: Shelving 32Hz – 2.0kHz, Peaking 63Hz – 2.0kHz

LOW MID, MID, HIGH MID: 100Hz – 10.0kHz

HIGH: 500Hz – 16.0kHz

GAIN

Determines the level gain for the Frequency (above), or the amount the selected frequency band is attenuated or

boosted.

Settings:

-12dB – +0dB – +12dB

Q (Frequency Characteristic)

This varies the signal level at the Frequency setting to create various frequency curve characteristics.

Settings:

0.1 – 12.0

NOTE

For details on EQ structure, see the “Synthesizer Parameter Manual” PDF document.

USB OUTPUT SELECT

Determines whether the audio signal for each Part is output to USB 1/2 or USB 3/4. This parameter is available only

when “Mode” is set to “2StereoRec” in the USB I/O display of the Utility mode.

Settings:

1&2, 3&4

[F3] MEQ (Master EQ)

[F4] USB I/O

–

Q (frequency bandwidth)

Gain

Frequency

5 bands



LOW LOW MID MID HIGH MID HIGH

–

EQ LOW

EQ HIGH

Gain

Frequency

Gain

Frequency

–

Gain

Frequency

Summary of Contents for MOX8

































































































































































Search results

Summary of Contents for MOX8

Reviews:

Related manuals for MOX8

Brands by name

Popular brands

Yamaha MOX8, Reference Manual

Search results

Summary of Contents for MOX8

Reviews:

Related manuals for MOX8

Brands by name

Popular brands