Yamaha MOX8 Reference Manual Download Page 158

Page: 158 / 160

MOX6/MOX8 Reference Manual

File Mode

Supplementary Information

158

Supplementary Information



File/Folder selection

The illustrations and instructions below show you how to select files and directories on a USB flash memory device

within the File mode.

Select the directory or file by using the [DATA] dial and [INC]/[DEC] buttons.



Playing back a SMF (Standard MIDI file) from USB flash memory

In the File mode, you can directly play back a SMF file saved in a USB flash memory device. This function is convenient

in live performance, since it lets you easily use SMF data as accompaniment while you play the keyboard.

Connect the USB flash memory including the SMF file device to this instrument.

Enter the Song mode or Pattern mode, then select the desired Song or Pattern.

Press the [FILE] button to enter the File mode.

Press the [F3] LOAD button to call up the Load display.

Move the cursor to “TYPE,” then select the “Song” or “Pattern.”

Select the SMF file.

Press the [F6]

(Play) button to play back the SMF file with the Mixing settings of the currently

selected Song or Pattern. Press the [SF2]

(Stop) button again to stop playback.

Try playing the keyboard along with the accompaniment of the SMF file.

To return to the next highest level,
press the [EXIT] button.

To go to the next lowest level,
highlight the desired directory and
press the [ENTER] button.

Summary of Contents for MOX8

































































































































































Search results

Summary of Contents for MOX8

Reviews:

Related manuals for MOX8

Brands by name

Popular brands

Yamaha MOX8, Reference Manual

Search results

Summary of Contents for MOX8

Reviews:

Related manuals for MOX8

Brands by name

Popular brands