Yamaha MOTIF6 Voice Editor, Owner'S Manual

Page: 97 / 300

97
MOTIF Quick Start Guide
Saving/Loading data
Quick Star
t Guide
Saving/Loading data
Basic Structure (page 63) · Reference (page 266)
Many different types of data are created when using the MOTIF, and the following types are automatically
maintained in memory, even if the power is turned off: Voice, Performance, Master, Arpeggio and System settings
(parameters set in the Utility mode). Since the other data (e.g., wave data recorded via the Sampling function, Song,
Pattern) is lost when turning the power off, you should save it to a memory card or SCSI device connected to the
MOTIF. Data created on the MOTIF can be saved to Memory card or SCSI device in a variety of file types. By
selecting “All” as the file type to be saved, all your original MOTIF data can be saved to Memory card/SCSI device.
However, when loading this “All” data back to the MOTIF, you can choose a specific data type to be loaded (e.g., one
voice or one song), as illustrated below.
n
For details about using Memory cards, see page 289. For details about using SCSI devices, see page 264 and page 290.
Saving data
n
Before you can use a new Memory card or external SCSI device with the MOTIF, you’ll have to format it from the MOTIF.
See page 265 for details.
Voice
Performance
Master
System
Song
Pattern
Wave
Memory card
Save
SCSI device
All
Memory card
Load
SCSI device
One song
One voice
PLG 2
A B C D E F G H
15
CATEGORY
SEARCH
OCTAVE
DOWN UP
KNOB
CONTROL
FUNCTION
PAN REVERB CHORUS TEMPO
ATTACK RELEASE CUTOFF RESONANCE
ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2
KN 1 KN 2 KN 3 KN 4
MEQ LOW MEQ HI M ID MEQLOWMID MEQ HIGH
REMOTE
CONTROL
ON/OFF
EFFECT BYPASS ARPEGGIO
INSERTION SYSTEM ON/OFF
MASTER
VOLUME
VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4
CS 1 CS 2 CS 3 CS 4
ZONE 1 ZONE 2 ZONE 3 ZONE 4
SEQ TRANSPORT
LOCATE 1 2
REC
MODE
VOICE PERFORM MASTER
SEQUENCER
SONG PATTERN FILE
INTEGRATED
SAMPLING MIXING UTILITY
EDIT JOB STORE
COMPARE SCENE STORE
SET LOCATE
SONG SCENE
SF 1 SF 2 SF 3 SF 4 SF 5
F1 F2 F3 F4 F6 F5
INFORMATION
DEC/NO INC/YES
EXIT ENTER
EXECUTE
MUSIC PRODUCTION SYNTHESIZER
Integrated Sampling Sequencer
Real-time External Control Sur face
Modular Synthesis Plug-in System
DRUM KITS
FAVORITES
SLOT 1 SLOT 2 SLOT 3
PRE 1 PRE 2 PRE 3 GM USER PLG 1 PLG 3
A. PIANO KEYBOARD ORGAN GUITAR /
PLUCKED BASS STRINGS BRASS REED/PIPE
SYN LEAD SYN PAD/
CHOIR
SYN COMP CHROMATIC
PERCUSSION DRUM /
PERCUSSION
SE MUSICAL FX COMBI
1 2 3 4 5 6 7 8
9 10 11 12 13 14 16
SECTION
TRACK
SELECT
MUTE
SOLO
BANK
GROUP
NUMBER
COMMON
ELEMENT/ PERF.PART / ZONE
1 Enter the File
mode by pressing
the [FILE] mode.
SEQUENCER
SONG PATTERN FILE
INTEGRATED
SAMPLING
MIXING UTILITY
SF 1 SF 2 SF 3 SF 4 SF 5
F1 F2 F3 F4 F6 F5
INFORMATION
5 Select a file type to be saved.
Here, select “All.”
n
For details about file type to be saved, see
page 262.
7 Press the [ENTER] button.
8 Press the [INC/YES] button to
execute the Save operation.
6 Select a folder to which the data is to be
saved.
DEC/NO INC/YES
EXIT ENTER
EXECUTE
DEC/NO INC/YES
EXIT
ENTER
EXECUTE
4 Call up the SAVE display.
3 Select a device to which the data is to be saved.
Move the cursor to the Current parameter and select
“CARD” or “SCSI.”
SF 1 SF 2 SF 3 SF 4 SF 5
F1 F2 F3 F4 F6 F5
INFORMATION
2 Call up the CONFIG display.
SF 1 SF 2 SF 3 SF 4 SF 5
F1 F2 F3 F4 F6 F5
INFORMATION
Device
Free space
n
You can name the folder by using the [F4] button
and create a new folder by using the [F6] button.