MOTIF-RACK XS Editor Window: Bottom section
MOTIF-RACK XS Editor Owner’s Manual
32
Bottom section
1
Controller Set status
This section indicates which controller of the MOTIF-RACK XS (either built-in or connected) is used as
the Control Source of the Controller Set edited in the RCV/CONTROLLER SET ASSIGN window.
1
Part
Indicates the current Part. When [Voice]/[Multi] is set to “Voice” (Voice mode is enabled), in the Voice
mode, this indication is fixed to “1.” When the [Voice]/[Multi] is set to “Multi” (Multi mode is enabled), in the
Multi mode, this indication is determined by selecting the Part in the Mixer section.
2
Control Source
Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as
follows:
3
On/Off status
When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source
(controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source
(controller).
Indication
Control Source
Indication
Control Source
PB
Pitch Bend Wheel
BC
Breath Controller
MW
Modulation Wheel
AS1
ASSIGN 1 knob
AT
After Touch (keyboard)
AS2
ASSIGN 2 knob
FC
Foot Controller
FC2
Foot Controller 2
FS
Foot Switch
AF1
ASSIGNABLE FUNCTION 1 button
RB
Ribbon Controller
AF2
ASSIGNABLE FUNCTION 2 button
1
2
8
)
3
9
6
7
4
5
1
3
2