Yamaha MODX6 Reference Manual Download

Page: 95 / 217

Edit

MODX Reference Manual

Normal Part (AWM2) Edit

Copy or Exchange
Elements

Reference



Copying or Exchanging Motion Sequences

You can copy or exchange between Motion Sequences.

NOTE

You can select “All” for “Lane” and “MS Select” when copying between different Parts.

Copy

Touching this button activates the Motion Sequence Copy function.

Exchange

Touching this button activates the Motion Sequence Exchange function.

Part to be copied (or exchanged)

NOTE

The currently selected Part is set automatically and this setting cannot be changed.

Lane to be copied (or exchanged)

Motion Sequence Select to be copied (or exchanged)

Copy (or exchange) destination Part

Copy (or exchange) destination Lane

Copy (or exchange) destination Motion Sequence Select

Operation

[PERFORMANCE (HOME)]



[EDIT]



Select Part to be copied



[Motion Seq]



[Lane]



[SHIFT]

+ [EDIT]
or
[PERFORMANCE (HOME)]



[Motion Control]



[Motion Seq]



Select Part to be copied



[SHIFT]

+ [EDIT]
or
[PERFORMANCE (HOME)]



[Motion Control]



[Knob Auto]



[SHIFT] + [EDIT]

Copy Exchange

Summary of Contents for MODX6


























































































































































































































Search results

Summary of Contents for MODX6

Reviews:

Related manuals for MODX6

Brands by name

Popular brands

Yamaha MODX6, Reference Manual

Search results

Summary of Contents for MODX6

Reviews:

Related manuals for MODX6

Brands by name

Popular brands