Yamaha MODX6 Page 152 Reference Manual Download

Page: 152 / 217

Edit

MODX Reference Manual

Normal Part (FM-X) Edit

Copy or Exchange
Operators

152

Reference

Same as the Element Common Edit parameters for Normal Parts (AWM2) (

page 96

), except that the

setting values of the Destination parameter differ and that “Element Phase Offset (LFO Element Phase
Offset)” is not available. For details on the setting values, see the Data List PDF document.

LFO Wave (2nd LFO Waveform)

Selects the 2nd LFO waveform.

Settings:

Triangle, Saw Down, Saw Up, Square, Sine, S/H

NOTE

When “Sine” is selected, two waves will be shown in the diagram on the display because of the phase shift of
the Amplitude Modulation wave.

Key On Reset (2nd LFO Key On Reset)

Determines whether or not the 2nd LFO is reset each time a note is pressed.

Settings:

Off, On

Speed (2nd LFO Speed)

Adjusts the speed (frequency) of the 2nd LFO variation.

Settings:

0–99

Phase (2nd LFO Phase)

Determines the starting phase point for the 2nd LFO Wave when it is reset.

Settings:

0°, 90°, 180°, 270°

Delay (2nd LFO Delay Time)

Determines the delay time between the moment you press a key on the keyboard and the moment the 2nd
LFO comes into effect.

Settings:

0–99

Mod/Control (Modulation/Control)

Part LFO

2nd LFO

Operation

[PERFORMANCE (HOME)]



[EDIT]



Part selection



Operator [Common]



[Mod/Control]



[2nd LFO]

Pitch Modulation Operator Depth Ratio

(2nd LFO Pitch Modulation Operator Depth Ratio)

Amplitude Modulation Operator Depth Ratio

(2nd LFO Amplitude Modulation Operator Depth Ratio)

Summary of Contents for MODX6


























































































































































































































Search results

Summary of Contents for MODX6

Reviews:

Related manuals for MODX6

Brands by name

Popular brands

Yamaha MODX6, Reference Manual

Search results

Summary of Contents for MODX6

Reviews:

Related manuals for MODX6

Brands by name

Popular brands