manualshive.com logo in svg

Yamaha MM700H, Owner'S Manual, Page: 49 / 94

Share
Download
Yamaha MM700H Owner'S Manual Download Page 49

7-11

ESU00318

Driving

WARNING

@ 

Be sure to read the “SAFETY INFORMATION” and
“Riding your snowmobile” sections carefully before
operating the snowmobile. 

@

NOTE:

@ 

Make sure that the engine is warmed up enough before
riding. 

@

For MM700

1. Release the parking brake by moving the parking

brake lever to the right. 

2. Press the throttle lever slowly to move the snowmo-

bile. 

3. Turn the handlebar in the desired direction. 
4. Squeeze the brake lever to stop the snowmobile. 
5. Apply the parking brake by moving the parking brake

lever to the left.

For VT700

1. Select the desirable operating position by moving the

shift lever.

1

Push down 

2

“FWD” Forward 

3

“REV” Reverse

WARNING

@ 

●

Make sure that the throttle lever is fully released
and the snowmobile is at a full stop before shift-
ing. 

●

Be sure to move the shift lever to forward or
reverse until it stops completely while the engine
is idling. 

●

Make sure that the area behind the snowmobile is
clear before reversing. Watch behind. 

●

Reduce speed and avoid sharp turning when
operating the snowmobile in reverse. 

@

NOTE:

@ 

The reverse buzzer beeps while the shift lever is in
reverse. 

@

U8DM10.book  Page 11  Tuesday, May 7, 2002  12:10 PM

Summary of Contents for MM700H































































































Reviews:

No comments