background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-18

7

EAUU0712

Tires 

To maximize the performance, durabil-
ity, and safe operation of your motorcy-
cle, note the following points regarding
the specified tires.

Tire air pressure

The tire air pressure should be
checked and, if necessary, adjusted
before each ride.

EWA10501

WARNING

Operation of this vehicle with im-
proper tire pressure may cause se-
vere injury or death from loss of
control.

The tire air pressure must be
checked and adjusted on cold
tires (i.e., when the temperature
of the tires equals the ambient
temperature).

The tire air pressure must be
adjusted in accordance with the
riding speed and with the total

weight of rider, passenger, car-
go, and accessories approved
for this model. 

_

EWA10511

WARNING

Never overload your vehicle. Opera-
tion of an overloaded vehicle could
cause an accident. 

_

Tire inspection

The tires must be checked before each
ride. If the tire shows crosswise lines
(minimum tread depth), if the tire has a
nail or glass fragments in it, or if the
sidewall is cracked, have a Yamaha
dealer replace the tire immediately.

Tire air pressure (measured on cold 
tires):

Up to 90 kg (198 lb):

Front:

200 kPa (2.00 kgf/cm

2

, 29 psi)

Rear:

225 kPa (2.25 kgf/cm

2

, 33 psi)

90 kg (198 lb) to maximum load:

Front:

200 kPa (2.00 kgf/cm

2

, 29 psi)

Rear:

225 kPa (2.25 kgf/cm

2

, 33 psi)

Maximum load*:

163 kg (359 lb)

*

Total weight of rider, passenger, 
cargo and accessories

1. Tire sidewall

2. Tire wear indicator

3. Tire tread depth

Minimum tire tread depth (front and 
rear):

0.8 mm (0.03 in)

E_19SF8199E0.book  Page 18  Thursday, January 14, 2010  9:38 AM

Summary of Contents for MIO AL115S 2010

















































































Reviews: