Yamaha MGP32X, Owner'S Manual

Page: 49 / 56

MGP32X/MGP24X Owner’s Manual 49
Appendix

Analog Input Characteristics
0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum
level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.

Analog Output Characteristics
0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone Jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*4 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
Input Terminals PAD
GAIN
TRIM Actual Load
Impedance
For Use With
Nominal
Input level
Connector
Sensitivity
*1
Nominal Max. before clip
MONO CH Input
MGP32X: 1–24
MGP24X: 1–16
0
-60 dB
3 kΩ
50–600 Ω
Mics
-80 dBu (0.078 mV) -60 dBu (0.775 mV) -40 dBu (7.75 mV) XLR-3-31 type
*2
Phone Jack
*4
-16 dB -36 dBu (12.3 mV) -16 dBu (123 mV) +4 dBu (1.23 V)
26 dB
-34 dB
600 Ω
Lines
-54 dBu (1.55 mV) -34 dBu (15.5 mV) -14 dBu (155 mV)
Phone Jack
*3
+10 dB -10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V)
ST CH Input
MGP32X: 25–32
MGP24X: 17–24
—
-34 dB
10 kΩ
600 Ω
Lines
-54 dBu (1.55 mV) -34 dBu (15.5 mV) -14 dBu (155 mV) Phone Jack
*4
RCA Pin Jack
+10 dB -10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V)
MONO CH
INSERT Input
MGP32X: 1–24
MGP24X: 1–16
— — 10 kΩ
600 Ω
Lines
-20 dBu (77.5 mV) 0 dBu (0.775 V) +20 dBu (7.75 V) Phone Jack
*5
ST CH INSERT
Input L, R
— — 10 kΩ
600 Ω
Lines
-20 dBu (77.5 mV) 0 dBu (0.775 V) +20 dBu (7.75 V) Phone Jack
*5
TALKBACK Input — — 10 kΩ
50–600 Ω
Mics
-66 dBu (0.389 mV) -50 dBu (2.45 mV) -30 dBu (24.5 mV) XLR-3-31 type
*6
Output Terminals
Actual Source
Impedance
For Use With
Nominal
Output Level
Connector
Nominal Max. before clip
STEREO OUT L, R 75 Ω 600 Ω Lines +4 dBu (1.23 V) +24 dBu (12.3 V)
XLR-3-32 type
*1
Phone Jack
*4
MONO OUT 75 Ω 600 Ω Lines +4 dBu (1.23 V) +24 dBu (12.3 V) XLR-3-32 type
*1
GROUP OUT 1–4 150 Ω 10 kΩ Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack
*2
AUX SEND 1–6 75 Ω 600 Ω Lines +4 dBu (1.23 V) +24 dBu (12.3 V) XLR-3-32 type
*1
MATRIX OUT 1–2 150 Ω 10 kΩ Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack
*2
MONO CH INSERT OUT
MGP32X: 1–24
MGP24X: 1–16
75 Ω 10 kΩ Lines 0 dBu (0.775 V) +20 dBu (7.75 V) Phone Jack
*3
ST CH INSERT OUT L, R 75 Ω 10 kΩ Lines 0 dBu (0.775 V) +20 dBu (7.75 V) Phone Jack
*3
MONITOR OUT L, R 150 Ω 10 kΩ Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack
*2
PHONES OUT 150 Ω 40 Ω Phones 3 mW 75 mW Stereo Phone Jack