1-12
GEN
INFO
E
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate adjustment and assembly.
Using special tools will help avoid damage caused by the use of improper tools or incorrect
procedures.
(These special tools are recommended by Yamaha. The tool numbers indicated below are those of TOYOTA Motor
Corporation, except for the tools marked with *.)
TOOL No.
09248-64011
*TDG-7
(from BANZAI)
*NO.30
(from IYASAKA)
09275-54001
09950-40011
09951-04010
09952-04010
09953-04010
09354-04010
09955-04060
09955-04011
09957-04010
TOOL NAME
Valve clearance adjust-
ing tool
Compression gauge
attachment
Plunger stroke measur-
ing tool
Puller B set
Hanger 150
Slide arm
Center bolt 150
Arm 25
Claw No.6
Craw No.1
Attachment
REMARKS
To valve clearance adjustment
(Page 3-14)
To measure compression
(Page 3-19)
To check injection timing
(Page 3-28)
(Page 5-11, 5-20, 5-22, 5-23)
To remove camshaft timing pulley, oil
pump drive gear, crankshaft timing
gear and injection pump drive gear
bearing
To remove camshaft timing pulley, oil
pump drive gear, crankshaft timing
gear and injection pump drive gear
bearing
To remove camshaft timing pulley, oil
pump drive gear, crankshaft timing
gear and injection pump drive gear
bearing
To remove camshaft timing pulley, oil
pump drive gear, crankshaft timing
gear and injection pump drive gear
bearing
To remove camshaft timing pulley,
crankshaft timing gear and injection
pump drive gear
To remove injection pump drive gear
bearing, oil pump drive shaft gear
To remove injection pump drive gear
bearing
ILLUSTRATION
SPECIAL TOOLS
