SERVICE MANUAL
1 0 0 8 9 2
SERVICE MANUAL
DISTRIBUTED AUDIO CONTROLLER/AMPLIFIER
MCX-C15/MCX-CA15
MCX-C15/
MCX-CA15
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these
reasons, we advise all YAMAHA product owners that any service required should be performed by an
authorized YAMAHA Retailer or the appointed service representative.
IMPORTANT:
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification
or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any
form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevita-
ble and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this
buss).
IMPORTANT:
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the
unit.
IMPORTANT NOTICE
● MCX-C15
お客様所有のMCX-1000との組み合わせで動作し
ない場合、お客様所有のアップデートCD-ROMを
使ってアップデートを行ってください。
● MCX-CA15
モードスイッチの設定位置が修理前と異なってい
る可能性がありますので、ご使用前に用途に合っ
た適切な位置に設定してください。
修理済品返却時に以下のことをお客様に伝えてください。
Please be sure to inform the user of the following when re-
turning the repaired product to him/her.
●
MCX-C15
When the unit used in combination with MCX-1000
does not operate, execute updating by using the
Upgrade CD-ROM owned by the user.
●
MCX-CA15
The setting position of the Mode Switch may be dif-
ferent from its position before the repair. Check and
set the switch to the suitable position for the use
purpose before using the unit.
’04.07
