background image

En

This unit provides 

Bluetooth

 functionality. You can enjoy wireless music playback from your 

Bluetooth

 device (mobile 

phone, digital audio player, etc.). Please also refer to the owner’s manual of your 

Bluetooth

 device.

You’ll need to perform the pairing operation the first time you use your 

Bluetooth

 device with this unit, or if the pairing 

settings have been deleted. Pairing is an operation that registers the 

Bluetooth

 device with this unit. Once pairing has been 

completed, subsequent reconnection will be easy even after the 

Bluetooth

 connection is disconnected (

 P. 10). If pairing is 

not successful, refer to the item “

Bluetooth

” in “TROUBLESHOOTING” (

 P. 20).

Yamaha does not guarantee all connections between this unit and 

Bluetooth

 device.

• This unit can be paired with up to 8 

Bluetooth

 devices. When pairing with the 9th device has succeeded, pairing data for the device with the 

oldest connection date will be deleted.

• While connecting to the 

Bluetooth

 device and perform the pairing with another device, the current 

Bluetooth

 connection will be canceled.

LISTENING TO MUSIC FROM YOUR 

Bluetooth

 DEVICE

Playing back from your 

Bluetooth

 device

1

Press the 

BLUETOOTH

 source button for 

more than 2 seconds to enter pairing mode.

• Pairing mode lasts for 5 minutes.
• In pairing mode, the front panel display of this unit will 

indicate “BT Pairing...”.

You can also enter pairing mode by holding down 

SOURCE

 on 

this unit.

2

Perform 

Bluetooth

 pairing on the 

Bluetooth

 

device.

For details refer to the owner’s manual of the 

Bluetooth

 

device.

3

From the 

Bluetooth

 connection list of the 

Bluetooth

 device, choose this unit (MCR-B020 

Yamaha).

When pairing has been completed, the front panel display 
of this unit will indicate “BT Pairing OK”.

If you are asked to enter a password, enter the numerals “0000”.

4

Connect this unit and the 

Bluetooth

 device via 

Bluetooth

.

5

Play back music from the 

Bluetooth

 device.

Take care that the volume setting of this unit is not too high. We 
recommend that you adjust the volume on the 

Bluetooth

 device.

• If you connect via 

Bluetooth

 from the 

Bluetooth

 device while this 

unit is in standby (except ECO standby), this unit will 
automatically turn on.

• If you disconnect the 

Bluetooth

 connection from the 

Bluetooth

 

device while the audio source is set to 

Bluetooth

, this unit will 

automatically turn off (standby).

• If 

Bluetooth

 is selected as the audio source, this unit will 

automatically turn off (standby) when 20 minutes have elapsed 
without any 

Bluetooth

 connection nor any operation performed.

1

1 5 : 3 0 

B T

P a i r i n g   O K

3

Summary of Contents for MCRB020BLK





























Reviews: