PREPARATIONS
8
En
PREPARATION
Make sure you read the following procedure and note carefully before connecting the system.
The remote control
and linked operation of the system only work when the receiver and the CD player are connected via
the system control cable.
For information on the speakers (NS-BP300), refer to the owner’s manual supplied with it.
Connecting the system
1
Connect the AUDIO IN (
PLAYER L/R) jacks of the receiver to the AUDIO OUT (
L/R) jacks of the CD player
using the supplied audio RCA stereo cable.
2
Connect the SYSTEM CONNECTOR (
TO:PLAYER) jack of the receiver to the SYSTEM CONNECTOR
(
TO:RECEIVER) jack of the CD player using the supplied system control cable.
3
Connect the speaker terminals (L) of the receiver to the speaker terminals of the left speaker and the speaker terminals
(R) of the receiver to the speaker terminals of the right speaker using the speaker cables supplied with the speaker set
(NS-BP300).
4
Connect the supplied FM antenna to the FM jack, and DAB antenna to the DAB jack.
• Do not connect this unit or other components to the main power until all connections between components are complete.
• Do not let the bare speaker wires touch each other or any metal part of the receiver. This could damage the receiver and/or the
speakers.
• All connections must be correct: L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be
heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Also,
refer to the owner’s manual for each of your components.
Notes
• The system control connection is used to transmit the remote control signals from the receiver to the CD player.
• When connecting speakers other than NS-BP300, use speakers having more than 6
Ω
impedance.
• If there is a problem of weak radio wave reception in your area or you want to improve radio reception, we recommend that you use
commercially available outdoor antennas. For details, consult the nearest authorized Yamaha dealer or service center.
PREPARATIONS
Connecting speakers/external components/antennas
CAUTION
A
A
B
B
AUDIO
OUT
A
L
TO:RECEIVER
SYSTEM
CONNECTOR
TO:PLAYER
FM
75
ޓ
UNBAL
DAB
75
ޓ
UNBAL
SUBWOOFER
OUTPUT
ANTENNA
SPEAKERS
ANTENNA
6 MIN./SPEAKER
PLAYER
AUX
AUDIO
IN
SYSTEM CONNECTOR
A
B
B
R
L
R
R
L
R
L
INPUT
INPUT
L
1
2
5
4
3
Receiver (R-840)
(Europe model)
CD player (CD-640)
Left speaker
(NS-BP300)
Right speaker
(NS-BP300)
RCA stereo cable
(supplied)
System control cable
(supplied)
DVD player etc.
Subwoofer
Audio
out
RCA
stereo
cable
Indoor DAB antenna (supplied)
y
Stretch out the antenna and place it to find the best reception
position then fix it.
