Yamaha Majesty YP400Z Owner'S Manual Download | Manualshive

Page: 3 / 102

background image

INTRODUCTION

EAU10092

Congratulations on your purchase of the Yamaha YP400Z. This model is the result of Yamaha’s vast experience in the pro-
duction of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reli-
ability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this scooter. If you have
any questions concerning the operation or maintenance of your scooter, please consult a Yamaha dealer.
The design and manufacture of this Yamaha scooter fully comply with the emissions standards for clean air applicable at the
date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation of the
scooter. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the rec-
ommended maintenance schedules and operating instructions contained within this manual.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur-
rent product information available at the time of printing, there may be minor discrepancies between your scooter and this
manual. If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING

EWA12581

Please read this manual and the “YOU AND YOUR MOTORCYCLE: RIDING TIPS” booklet carefully and completely
before operating this scooter. Do not attempt to operate this scooter until you have attained adequate knowledge
of its controls and operating features and until you have been trained in safe and proper riding techniques. Regular
inspections and careful maintenance, along with good riding skills, will ensure that you safely enjoy the capabilities

and reliability of this scooter.

«
1
2
3
4
5
...
»

Summary of Contents for Majesty YP400Z







































































































Reviews:

No comments

Related manuals for Majesty YP400Z

Brand: Razor Pages: 12

Yotsuba Moto Meow 12

Brand: DIRT FREAK Pages: 20

Brand: Olsson and Brothers Pages: 76

Brand: Myria Pages: 52

Brand: Yamaha Pages: 84

Brand: Yamaha Pages: 217

Movexx T2500-Platform

Brand: brain power Pages: 132

PowerWise 09360

Brand: American Power Pages: 8

COMET EU-H1-COMT

Brand: Hover-1 Pages: 31

Brand: CareCo Pages: 21

Brand: KOMFI-RIDER Pages: 28

Brand: KOMFI-RIDER Pages: 28

Brand: KOMFI-RIDER Pages: 28

Brand: KOMFI-RIDER Pages: 32

Brand: KB Pages: 14

Brand: NAVEE Pages: 90

Brand: Shoprider Pages: 24

Brand: Rider Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands