PERIODIC MAINTENANCE AND ADJUSTMENT
7-17
1
2
3
4
5
6
7
8
9
6. Install the final transmission oil
drain bolt and its new gasket, and
then tighten the bolt to the speci-
fied torque.
7. Refill with the specified amount of
the recommended final transmis-
sion oil.
WARNING! Make sure
that no foreign material enters
the final transmission case.
Make sure that no oil gets on the
tire or wheel.
[EWA11311]
8. Install the final transmission oil fill-
er cap and its new O-ring, and then
tighten the oil filler cap.
9. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
EAU20070
Coolant
The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
EAU34193
To check the coolant level
1. Place the vehicle on a level sur-
face and hold it in an upright posi-
tion.
TIP
●
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
●
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Pull up the right floorboard mat as
shown.
1. Final transmission oil filler cap
2. O-ring
3. Final transmission oil drain bolt
4. Gasket
Tightening torque:
Final transmission oil drain bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
2
1
3
4
Recommended final transmission
oil:
Oil quantity:
0.25 L (0.26 US qt, 0.22 Imp.qt)
✼✦✧✯✪✥✲✣ ✤✪
Summary of Contents for MAJESTY YP400A
Page 1: ...OWNER S MANUAL 34B 28199 72 YP400A Read this manual carefully before operating this vehicle ...
Page 11: ...LOCATION OF IMPORTANT LABELS 1 4 1 2 3 4 5 6 7 8 9 1 1 3JK 82377 10 ...
Page 97: ...INDEX Wheel bearings checking 7 31 Wheels 7 24 ...
Page 98: ...PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD PRINTED IN JAPAN 2010 03 0 1 1 E ...
