M7CL Editor Installation Guide
3
The M7CL Editor enables you to remotely monitor/control the Yamaha M7CL mixing console, save the parameter
settings on your computer, and also prepare the M7CL settings beforehand by editing the parameters offline.
For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program.
Minimum System Requirements
The system requirements below may differ slightly depending on the particular operating system.
n
The Minimum System Requirements described above are applied to the M7CL Editor version 2.1.0. Keep in mind that the software is
often updated and the system requirements are subject to change. You can check the latest version information of each program and its
system requirements at the following website
http://www.yamahaproaudio.com/
The system requirements may differ slightly depending on the particular computer.
M7CL Editor
Installing the Software
Procedures
Windows
1
Verify that your system meets the operating requirements of each software program.
2
Install the appropriate driver to your computer.
3
Install the Studio Manager and each editor.
4
Start up the Studio Manager, then start up the editor.
Software installation
OS
Windows XP Home Edition/XP Professional
Computer
800 MHz or higher; Intel Pentium/Celeron processor
Available Memory
256 MB or more
Hard Disk
30 MB or more
Display
1024 x 768, high color (16 bit) or higher
