Yamaha M06, Owner'S Manual, Page: 164 / 240

V
oice mode
P
erf
ormance
mode
Song mode
Utility mode
File mode
Master mode
P
attern mode
Mixing V
oice
mode
Ref
erence
Voice Edit mode Element Edit
164
Owner’s Manual
[F6] EQ (Equalizer)
Type Determines the Equalizer Type. This synthesizer features a wide selection of various equalizer types, which can
be used not only to enhance the original sound, but even completely change the character of the sound. The
particular parameters and settings available depend on the specific Equalizer Type that is selected.
Settings: EQ L/H, P.EQ, boost6, boost12, boost18, thru
EQ L/H (Low/High).................This is a “shelving” equalizer, which combines separate high and low frequency bands.
P.EQ (Parametric EQ) ............The Parametric EQ is used to attenuate or boost signal levels (gain) around the Frequency. This
type features 32 different “Q” settings, which determine the frequency band width of the equalizer.
boost6 (boost 6dB)/boost12 (boost 12dB)/boost18 (boost 18dB)
These can be used to boost the level of the entire signal by 6dB, 12dB and 18dB, respectively.
thru.........................................If you select this, the equalizers are bypassed and the entire signal is unaffected.
Low Freq
Low Gain
High Freq
High Gain
Frequency
Gain
Settings: 50.1Hz – 2.00kHz
Setttings: 503.8Hz – 10.1kHz
Settings: -32 – 0 – +32 Settings: -32 – 0 – +32
–
+
0
–
+
0
Gain
Settings: -32 – 0 – +32
Freq
Settings: 139.7Hz – 12.9kHz
Q (Frequency characteristic)
Settings: 0 – 31
Frequency
Gain
When set to EQ L/H When set to P.EQ