Yamaha LX225A, Owner'S Manual

Page: 83 / 122

E
4-14
207052
q
w
e
r
t
5) Tighten the ring nut approximately an
additional 1/4 turn until ring nut is
tight.
Align one of the four larger ring nut
tabs into the slot of the locking tab.
Install the locking tab bolt and tight-
en.
6) Run the engine and check the filter
and lines for leaks.
1
Filter element
2
O-ring
3
Filter cap
4
Ring nut
5
Filter housing
NOTE:
If any water is in the fuel, the red ring in
the fuel filter unit will float. If so, remove
the cup and drain the water.
EMK54110
ADJUSTING IDLING SPEED
w
8
Do not touch or remove electrical parts
when starting or during operation.
8
Keep hands, hair and clothes away
from flywheel and other rotating parts
while engine is running.
c C
This procedure must be performed while
the outboard motor is in the water. A
flushing attachment or test tank can be
used.