Yamaha LS9 Editor, Owner'S Manual

Page: 88 / 290

88
Operations in the SELECTED CHANNEL section
LS9-16/32 Owner’s Manual
●
Making insert settings (INPUT channels
1–32 and MIX/MATRIX/STEREO/MONO
channels only)
Use the INSERT field to make insert-related settings in the
SELECTED CH VIEW screen. This field includes the fol-
lowing items.
1 INSERT popup button
This accesses the INSERT popup window, where you can
assign input/output ports to insert-in/insert-out and specify
the signal insertion points for eight channels at a time.
B IN indicator
This indicates the signal level of the input port that is
patched to insert-in.
C
INSERT ON/OFF button
Switches the insert on/off.
To make insert settings, move the cursor to the INSERT
popup button, and press the [ENTER] key to access the
INSERT popup window. (For details on the popup win-
dow
→
p. 101)
When you’ve assigned input/output ports to insert-in/out
in the popup window, turn on the INSERT ON/OFF but-
ton.
●
Making direct output settings (INPUT
channels only)
Use the DIRECT field to make direct-output related set-
tings for an INPUT channel in the SELECTED CH VIEW
screen. This field includes the following items.
1
DIRECT popup button
This button accesses the DIRECT OUT popup window,
where you can assign an output port to the direct output
and adjust the output level for eight channels at a time.
B
DIRECT OUT ON/OFF button
Turns the direct output on/off.
To make direct output settings, move the cursor to the
DIRECT popup button, and press the [ENTER] key to
access the DIRECT OUT popup window. (For details on
the popup window
→
p. 103)
When you’ve assigned an output port to direct output in
the popup window, turn on the DIRECT OUT ON/OFF
button.
●
Setting a channel to Recall Safe
In the SELECTED CH VIEW screen, use the SAFE field
to set the currently selected channel to the Recall Safe sta-
tus (in which that channel will not be affected by Recall
operations). This field includes the following items.
1
SAFE popup button
This opens the RECALL SAFE screen, where you can
make settings related to Recall Safe.
B
PARTIAL indicator
This indicator will light if only some of the parameters of
that channel are set to Recall Safe.
C RECALL SAFE ON/OFF button
Switches the Recall Safe status on/off for the channel.
To set all parameters of the channel to Recall Safe mode,
press the RECALL SAFE ON/OFF button to turn it on.
If you want to set only specific parameters of the channel
to Recall Safe mode, use the SAFE popup button to access
the RECALL SAFE screen, and select the parameters that
you want to be in Recall Safe mode. (For details on the
RECALL SAFE screen
→
p. 140)
• You can also use the cursor keys to switch bands.
• If you’ve turned on POPUP APPEARS WHEN PRESSING
KNOBS in the PREFERENCE popup window (
→
p. 194), you can
also access the above popup window by pressing an EQ encoder
in the SELECTED CHANNEL section.
HINT
• The type of the LOW band EQ or HIGH band EQ cannot be
switched in the SELECTED CH VIEW screen. If necessary, you
can access the ATT/HPF/EQ popup window and switch the EQ
type.
• If the HIGH band EQ type is set to Low Pass Filter, the HIGH band
Q knob will not be displayed, and the GAIN knob will function as
an on/off switch for the Low Pass Filter.
NOTE
2
1
3
2
1
1
3
2