Yamaha LS9 Editor, Owner'S Manual

Page: 268 / 290

Warning/Error Messages
268
LS9-16/32 Owner’s Manual
Warning/Error Messages
Message Meaning
xxx Parameters Copied. Parameter xxx was copied to the copy buffer.
xxx Parameters Initialized. Parameter xxx was initialized.
xxx Parameters Pasted. Parameter xxx was pasted from the copy buffer.
xxx Parameters Swapped with Copy Buffer. Parameter xxx was exchanged with the contents of the copy buffer.
Assignment is Restricted to Max. 8 Sources!
The Monitor Define function allows a maximum of eight sources to be selected, but you attempted to
assign more than this.
Cannot Bookmark This Popup. This popup window cannot be bookmarked.
Cannot Recall to Different Parameter Type! You attempted to recall a library of a different type.
Cannot Recall! Failed to recall a scene memory or library.
Cannot Select This Channel. You attempted to select a channel that cannot be operated due to your user level or some other reason.
Cannot Store! Failed to store a scene memory or library.
Cannot Undo! You pressed the [UNDO] button when Undo was not available.
Couldn’t Access File. File on the USB memory could not be accessed for some reason.
Couldn’t Write File. File could not be saved from the USB memory.
Current User Changed. [xxx] Current user was changed to [xxx].
Directory Not Empty! You attempted to delete a directory, but failed because there were files remaining in the directory.
EFFECT CUE: Turned Off. CUE was defeated because you switched from the RACK screen to a different screen.
External HA Connection Conflict!
External HA data could not be recalled, because the state of connections to the external HA differs
from when the scene was stored.
File Access is Busy! The following operation has not been performed yet because the USB memory is being accessed.
File Already Exists!
The USB memory already contains a file/directory with the same name as the one you are attempting
to save, rename, or create.
File Error [xx]! Internal file access error
File Protected! Overwriting was not possible because the file on the USB memory is write-protected.
Help File Not Found! Can’t find HELP file.
Illegal Address! The IP address or Gateway address setting is invalid.
Illegal MAC Address! Cannot Use Network.
Communication via the Network connector is not possible because the MAC address setting has been
damaged for some reason. Please contact your Yamaha dealer.
Illegal Storage Format! The USB memory could not be accessed because its format is invalid or unsupported.
KEY IN CUE: Turned Off.
KEY IN CUE was defeated because you switched from the DYNAMICS 1/2 popup window to a differ-
ent screen.
Loading Aborted. Loading from USB memory was aborted.
Low Battery! The backup battery voltage is low.
Maximum Number of Audio Files
Exceeded!
The number of songs that can be managed by the USB memory recorder has been exceeded.
Memory Error! All Memories were
Initialized. All data has been initialized because the data in internal backup memory has been lost, due to failure
of the backup battery or some other reason. Please contact your Yamaha dealer.
MIDI: Data Framing Error! An inappropriate signal is being input to the MIDI input port.
MIDI: Data Overrun! An inappropriate signal is being input to the MIDI input port.
MIDI: Rx Buffer Full! Too much data is being received at the MIDI input port.
MIDI: Tx Buffer Full! To much data is being transmitted from the MIDI output port.
No Access From Recorder! In the RECORDER screen, it is not possible to move to a level higher than YPE/SONGS/.
No Controllable Knob.
Your operation has been ignored because there is no parameter that corresponds to the knob you
operated.
No Corresponding Help Items. A section in the HELP data cannot be found.
No Response from External HA. No response from an external AD8HR.
Page Bookmarked. The current screen or popup has been bookmarked.
Password Changed. The password has been changed.
PlayBack Failed: Recorder is Busy! Audio file link playback is not possible because recording is in progress.
Power Supply Fan has Malfunctioned!
The cooling fan of the internal power supply has stopped. If a malfunction has occurred, please con-
tact your Yamaha dealer.
Processing Aborted. Processing was interrupted.
Recorder Busy: Operation Aborted! Operation of the JPN button was cancelled because time is required for recorder processing.
Saving Aborted. Saving to the USB memory has been interrupted.
Scene #xxx is Empty!
No data has been stored in the scene you attempted to recall, or the data has been damaged so that
it cannot be recalled.
Scene #xxx is Protected! You attempted to overwrite (store) a protected scene.
Scene #xxx is Read Only! You attempted to overwrite (store) a read-only scene.