DIGITAL MIXING CONSOLE LS9
Short-Cuts ＆ Ｔｉｐｓ
Link across layers
Stereo instruments take two channels and two faders,
this can eat up faders on your top layer.
Try putting the right side fader on the second layer and linking
the two channels. To link across layers, go to CH JOB,
CH Link page and press SEL key of the L channel.
Press and hold the Enter key while moving to the second layer,
still holding the Enter key press the SEL key of the
R channel. The channels are now linked.
TIP:
Be sure to keep the faders at the same level when linking
or a L/R offset will be linked! (Press and hold the SEL key
when moving a fader to deliberately create an offset.)
LS9 preparation with Studio Manager
Many setup operations can be done with Studio Manager
Editor for LS9 on a PC or Mac.
Operations like naming channels and programming User Defined
Keys can be done quickly and easily without even opening the LS9
case. Create and save console sessions to a USB key directly
from your laptop and load later or connect directly to LS9
via Ethernet, and operate console features and use the
special windows REV-X editors on-line.
12.
13.
Yamaha Commercial Audio
5 / 5 Page
